熱門關鍵詞：濟南彩鋼板 | 濟南復合板 | 濟南彩鋼瓦 | 濟南c型鋼 | 濟南鋼結構 |
Different users have different requirements for the thickness of C-section steel wall. Some will be compared, but some are very thin. If we want to meet these requirements at the same time, the selected C-beam production process and equipment is very critical. As far as Xiaobian knows, it is difficult to produce high quality C-beam by cold rolling, so it has to be finished by C-beam machine.
After the material enters from the tail of the C-beam machine, it is pressed by various rollers, and the shaped C-beam is output from the head. This not only makes the necessary production process has been greatly optimized, but also improves the production efficiency, and ensures that C-beam products have uniform wall thickness and complex interface shape.
In order to achieve accurate wall thickness, the mold used by C-beam machine in pressing C-beam is composed of an accurate upper mold and some lower molds with the same size. Before processing, they should be installed in place, not only to ensure the smooth operation of the upper and lower dies, but also to ensure the uniform clearance around the four edges, so that the pressed C-beam can have uniform wall thickness.