熱門關鍵詞：濟南彩鋼板 | 濟南復合板 | 濟南彩鋼瓦 | 濟南c型鋼 | 濟南鋼結構 |
The framework of the colored steel tile roof is the core of the building, so there are high standards and high requirements for its production methods. This paper introduces how to make the framework of the colored steel tile roof, hoping that the construction personnel can read it carefully.
Starting from the gable side, it is laid from left to right (or the same as right to left). Then, after the first plate is placed, pull the alignment along the lower edge of the plate, and install each plate according to the alignment, and check at any time to avoid deviation. Finally, the laying surface is fixed on the strip along the center of each plate rib with self tapping screws.
2、 Close edge
The lap joint of roof (including canopy) trimming material shall be fixed with aluminum rivet and waterproof with water stop glue. Then, the self tapping screw head and aluminum rivet head of the roof edge closing plate shall be prevented by water stop glue. Finally, the construction and fixing method of the edge plate shall be changed according to the site measurement, and the drawing after confirmation shall prevail.
3、 Fixation method
The first fixed base in the first row is fixed on the left most side of the purlin with self tapping screws, then the ink line is snapped on the purlin as the reference line, and then the fixed base in the same row is fixed. Next, align the rib part of the first plate with the rib plate of the fixed seat, press down and clip in to check whether the buckle is correct. Then, buckle the short arm of the fixed seat onto the first paved inner rib of the panel, construct according to the above method, and adjust. According to the above sequence of laying, when the width of the remaining empty pavilions is less than half of the board width, only the short arm of the fixed base is used to fix the board, and the rest of the space is closed by flashing. If the last remaining space is more than half the width of the plate, the plate shall be fixed with a fixed seat, and the excess part shall be cut off.
In the future construction project, the constructors hope to make the framework of the colored steel tile roof in strict accordance with the methods mentioned above. If there are problems that cannot be solved, please consult us.